Fluon – PTFE Coating


We use Fluon (PTFE) to create a slippery surface for ants. Apply to the upper portion of the outworld so when you open the lid to feed the ants, they don’t escape.

SKU: N/A Category: Tag:

Product Description

Keep those ants in the container!  Laboratories and hobbyists use PTFE to prevent the ants from escaping.  For larger colonies, it is a must have.

Additional Information

Weight 0.0440925 oz
Dimensions .5 × .5 × 4 in

1oz with applicator and syringe, 1oz, 5ml

Gently swirl or stir bottle to mix but do not shake. Apply one coat to the top surface of the outworld, approx. 1/2 inch to 1 inch, by using a cotton swab. Use a circular or up-and-down motion while applying. There will be a whitish residue upon drying. Apply with good ventilation (near a vent fan or outside), avoid the fumes while it’s wet or drying. Wash hands thoroughly after use. Turn bottle over every few weeks to ensure maximum efficiency. Store solution at room temperature.

It is important to note that this product is a serious eye irritant. If it comes into contact with your eyes, rinse your eyes thoroughly with water for several minutes and seek medical attention if needed. Additionally, keep the product away from flames as fumes from burning can be toxic.

To top